Grandstream GVR3550 User Manual - Manual (Page 33)

Grandstream Networks, Inc. GVR3550 User Manual Page 33 of 120
Firmware Version 1.0.0.65 Last Updated: 10/2014
Table 9: GVR3550 Preview Status Explanation:
Icon Name Explanation
Motion Detection
Alarm Alarm when detecting dynamic motion.
Camera Lens
Occlusion Alarm Alarm in the corresponding camera when the remote camera is
obscured.
Missing Object
Alarm Alarm in the corresponding camera according to the alarm settings if
the remote camera supports missing object alarm and local missing
object alarm has been configured before.
Foreign Object
Alarm Alarm in the corresponding camera according to the alarm settings if
the remote camera supports missing object alarm once local foreign
object alarm has been configured before.
I/O Alarm Alarm when the remote camera is connected to IO alarm device
according to the alarm settings.
Record The monitoring camera is in record mode.
Add Camera If there is no existing camera, click this button to quick enter the
camera settings page to add camera.
-- Camera View Live view camera.
Camera
connection
Failed
Failed to connect the related IP Cameras.
Video Decoding
Failed It may be caused by protocol not supported, too large resolution and
exceeded the decoding ability.
On the preview page, the record and alarm status of each camera could be distinguished by the tag on the
top right corner of each camera.
A dialog box will pop up in the center screen to prompt the users if there is an abnormal alarm, as shown in
figure below, the prompt box would disappear in 3 seconds.