Grandstream GXP2200 User Manual - Manual (Page 52)

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 51 of 159
Figure 41: 3-way Conference Call Established
2. Remove party from conference
To remove a party from the conference, tap on the on the right top corner for the corresponding
party. Then it will be disconnected.
3. End conference
To end the conference, tap on to disconnect all the parties from the conference. GXP2200 will
hang up the call. If the remote party hangs up the call itself, it will be disconnected from the conference but
other parties on GXP2200 will stay in the existed conference.
4. Hold/Resume conference
During the conference, users could press the HOLD button to hold or resume the conference at
any time.
5. Auto Conference Mode
The GXP2200 also supports "Auto Conference" which allows users to establish conference call in a quick
and easy way, instead of adding the other parties one by one. To enable Auto Conference feature, go to
web GUI->Advanced Settings->Call Features and set "Auto Conference" to "Yes". To establish call
with auto conference when there are 1 or more calls on the GXP2200, simply press the conference button
and all the calls on GXP2200 will be brought into the conference.