Grandstream GXP2200 User Manual - Manual (Page 134)

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 133 of 159
select display "Phonebook Name", "UserID", or "UserID(Phonebook
Name)". The "Phonebook Name" is the name saved in GXP2200
Contacts. The default setting is "Phonebook Name".
Note:
For more details on GXP2200EXT and GXP2200EXT Multi-Purpose Key configurations, please refer to
the GXP2200EXT user manual in the website:
http://www.grandstream.com/support
MAINTENANCE PAGE DEFINATION
MAINTENANCE/NETWORK SETTINGS
Address Type
Allows users to configure the appropriate network settings on the phone.
Users could select "DHCP", "Static IP" or "PPPoE". By default, it is set to
"DHCP".
DHCP Host name (Option 12)
Specifies the name of the client. This field is optional but may be
required by some Internet Service Providers.
DHCP Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID. The default
setting is GXP.
IP Address Enter the IP address when static IP is used.
Subnet Mask Enter the Subnet Mask when static IP is used.
Default Gateway Enter the Default Gateway when static IP is used.
DNS Server 1 Enter the DNS Server 1 address when static IP is used.
DNS Server 2 Enter the DNS Server 2 address when static IP is used.
Enable PPPoE Select "Yes" to enable PPPoE.
PPPoE Account ID Enter the PPPoE account ID.
PPPoE Password Enter the PPPoE Password.
Layer 3 QoS for SIP
Defines the Layer 3 QoS parameter for SIP packets. This value is used
for IP Precedence, Diff-Serv or MPLS.