Grandstream GXP2200 User Manual - Manual (Page 135)

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 134 of 159
Layer 3 QoS for Audio
Defines the Layer 3 QoS parameter for Audio packets. This value is
used for IP Precedence, Diff-Serv or MPLS.
Layer 2 QoS 802.1Q/VLAN
Tag
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The
default value is 0.
Layer 2 QoS 802.1p Priority
Value
Assigns the priority value of the Layer2 QoS packets for LAN port. The
Default value is 0.
802.1x mode
Allows the user to enable/disable 802.1x mode on the phone. The
default setting is "Disable".
Identity Enter the Identity information for the 802.1x mode.
MD5 Password Enter the MD5 Password for the 802.1x mode.
CA Certificate Enter the CA Certificate for the 802.1x mode.
Client Certificate Enter the Client Certificate for the 802.1x mode.
MAINTENANCE/TIME SETTINGS
Assign NTP Server Address
Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server. The default setting is us.pool.ntp.org.
DHCP Option 42 override NTP
server
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set
up on the LAN. The default setting is "Yes".
DHCP Option 2 to override
Time Zone setting
Allows device to get provisioned for Time Zone from DHCP Option 2 in
the local server automatically. The default setting is "No".
Time Zone Controls the date/time display according to the specified time zone.
Time Display Format 12-hour or 24-hour time display format
Date Display Format
Configures the date display format on the LCD. The following formats
are supported:

Normal (M/DD/YYYY): 1/31/2012

YYYY/MM/DD: 2012/01/31

MM/DD/YYYY: 01/31/2012

DD/MM/YYYY: 31/01/2012
The default setting is DD/MM/YYYY.
MAINTENANCE/WEB/SSH ACCESS
Disable SSH
If set to “Yes”, the phone will not allow any SSH access to the phone.
The default setting is "No".
Access Method Allows users to select HTTP or HTTPS for Web Access. The default