Grandstream GXP2200 User Manual - Manual (Page 111)

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 110 of 159
CONNECTING TO NETWORK AND DEVICES
The GXP2200 supports a variety of network connections (Ethernet, Wi-Fi) and device connections,
including EHS headset (Plantronics), USB, SD card and Bluetooth device. Users can connect the
GXP2200 to transfer files from/to the GXP2200 using a USB connection, SD card or Bluetooth.
ETHERNET
Ethernet connection is turned on as DHCP by default. To configure Ethernet settings on GXP2200 LCD,
go to GXP2200's Settings application->Network. Or users could configure Ethernet settings from
GXP2200 web GUI->Maintenance->Network Settings.
TURNING ETHERNET ON OR OFF
1. Go to GXP2200's Settings;
2. Touch Network;
3. Check or uncheck the option for Ethernet.
CONFIGURING DHCP OR STATIC IP
1. Go to GXP2200's Settings;
2. Touch Network;
3. Touch Ethernet Settings;
4. Select Address Type. If Static IP is used, enter IP Address, Subnet Mask, Default Gateway,
DNS Server and Alternative DNS server for the GXP2200 to correctly connect to network.
WI-FI
WI-FI is supported on GXP2200 with WI-FI adaptor plugged in. Insert the USB WI-FI adaptor to the USB
port on the back of GXP2200 first and then go to GXP2200's Settings application->Network.
TURNING WI-FI ON OR OFF
1. Go to GXP2200's Settings;