Grandstream GXP2200 User Manual - Manual (Page 112)

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 111 of 159
2. Touch Network;
3. Check or uncheck the option for Wi-Fi.
Or, users could open the top status bar->System Settings and tap on WI-FI icon to turn it on/off.
ADDING WI-FI NETWORKS
1. Once Wi-Fi is turned on, GXP2200 will automatically start the scanning within the range;
2. Go to GXP2200's Settings;
3. Touch Network;
4. Touch Wi-Fi Settings;
5. A list of Wi-Fi networks will be displayed as scanning result. Tap on the SSID and enter the correct
password information to connect to the selected Wi-Fi network;
6. The phone will start connecting to the Wi-Fi. The status bar will show Wi-Fi signal strength;
7. Once it's added and the password is remembered, the GXP2200 will connect to it again when the
SSID is within the range.
USING STATIC IP WITH WI-FI
Static IP could be used for Wi-Fi connection. To configure static IP settings with Wi-Fi, following the steps
below.
1. Go to GXP2200's Settings;
2. Touch Network;
3. Touch Wi-Fi Settings;
4. Press Menu button and tap on "Advanced" to bring up advanced options;
5. Under "IP settings" section, select "Use static IP" to enable static IP first. Then configure IP address,
Gateway, Netmask, DNS 1 and DNS 2 address;
6. Once completed, the Static IP settings will be saved and used for Wi-Fi connection.
BLUETOOTH
Bluetooth is a proprietary, open wireless technology standard for exchanging data over short distances
from fixed and mobile devices, creating personal area networks with high levels of security. On GXP2200,
users could use Bluetooth to transfer files, share contact information with other Bluetooth portable devices,
or use Bluetooth headset for making calls as well as listening to media (music or other audio output) from
the GXP2200.