Unpairing a bluetooth device, Ehs headset – Grandstream GXP2200 User Manual User Manual
Page 115

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 114 of 159
UNPAIRING A BLUETOOTH DEVICE
1. In the Bluetooth settings, tap and hold on the Bluetooth device ID you want to unpair for 2-4
seconds;
2. In the prompted message, touch Unpair.
Or, once the device is disconnected, users could press and hold on to the Bluetooth device ID, then
options connect, unpair will show.
EHS HEADSET
The GXP2200 supports normal RJ11 headset and Plantronics EHS headset. To use Plantronics EHS
headset, go to the GXP2200 web GUI->Maintenance->Device Manager: Headset Type. Select
"Plantronics EHS" and reboot the phone to take effect.
z) Connect EHS Headset (Plantronics) to GXP2200. Insert headset connector into the RJ11 headset
port on the back of GXP2200;
aa) To use headset mode, press headset button
on the GXP2200. A headset icon
will
show on the GXP2200 status bar. There are two different headset mode for users to select from
web GUI-> Maintenance->Device Manager: Headset Key Mode. After selecting the desired
mode, save the change and reboot the phone to take effect. Please refer to section GXP2200 Web
GUI Settings for the key mode details.
USB
The GXP2200 supports USB connection for mouse, keyboard, USB storage devices and USB camera. To
use USB mouse or keyboard, simply plug it into the USB port on the back of the GXP2200 and it will be
ready to use.
To connect and access USB storage device:
1. Insert USB storage device into USB port at the back of the GXP2200;
2. It will take a few seconds for the GXP2200 to prepare the connection. Then the USB storage
icon will show on the status bar;
3. To access USB storage, go to GXP2200 MENU->File Manager->usb. Tap on it to access and
manage your data.