beautypg.com

Gxp2200 extension module (gxp2200ext), Table 3 : gxp2200 connectors – Grandstream GXP2200 User Manual User Manual

Page 19

background image



Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 18 of 159

Table 3: GXP2200 Connectors

SD Card Slot

SD Card Slot

USB Port

USB devices can be connected via the USB port.

For example:

Connect a USB flash drive to save captured pictures;

Connect a USB light to the GXP2200.

Connect a USB Wi-Fi dongle to the GXP2200.

Headset Port

RJ9 headset connector port (supporting EHS with Plantronics headset)

Handset Port

RJ9 handset connector port

PC Port

10/100/1000Mbps RJ-45 port connecting to PC

LAN Port

10/100/1000Mbps RJ-45 port connecting to Ethernet

Power Jack

12V DC Power connector port

EXT Port

RJ11 connector port to connect the GXP2200 Extension Board

To set up the GXP2200, follow the steps below:

1. Attach the phone stand to the back of the phone where there is a slot for the phone stand. Upper part

and bottom part are available for two angels;

2. Connect the handset and main phone case with the phone cord;

3. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the

router) using the Ethernet cable;

4. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an

electrical outlet. If PoE switch is used in step 3, this step could be skipped;

5. The LCD will display the booting up screen. Before continuing, please wait for the main screen display

to show up.

GXP2200 EXTENSION MODULE (GXP2200EXT)

The GXP2200 extension module (GXP2200EXT) is an ideal solution for the busy enterprise environment

looking to add the ability to receive and dispatch calls efficiently. Each extension module has 20

programmable buttons, Left and Right buttons, supporting 40 Multiple Purpose Keys to be configured.

GXP2200 supports up to 4 extension modules, adding 160 fully programmable phone extensions to the

phone.