Grandstream GXP2200 User Manual - Manual (Page 142)

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 141 of 159
Search Timeout
Specifies the interval (in seconds) for the server to process the request
and client waits for server to return. The default setting is 30 seconds.
LDAP Lookup For Dial
Configures to enable LDAP number searching when making outgoing
calls. The default setting is "No".
LDAP Lookup For Incoming
Call
Configures to enable LDAP number searching when receiving incoming
calls. The default setting is "No".
MAINTENANCE/DEVICE MANAGER
Disable Missed Call Backlight
If set to "Yes", the screen won't turn off on screen timeout when there is
unchecked missed call on the phone. The default setting is "No".
Disable Missed Call Indicator
If set to "Yes", the LED indicator on the upper right corner of the
GXP2200 will not light up when there is missed call on the phone. The
default setting is "No".
Disable MWI Indicator
If set to "Yes", the LED indicator on the upper right corner of the
GXP2200 will not light up when there is new voicemail on the phone.
The default setting is "No".
Disable New Message
Indicator
If set to "Yes", the LED indicator on the upper right corner of the
GXP2200 will not light up when there is new message on the phone.
The default setting is "No".
Disable Contact or Message
Full Indicator
If set to "Yes", the LED indicator on the upper right corner of the
GXP2200 will not light up when the contact storage or message storage
is full. The default setting is "No".
Disable Indicator When LCD is
Off
If set to "Yes", the LED indicator on the upper right corner of the
GXP2200 will not light up when the LCD screen is off. The default
setting is "No".
Headset TX Gain (dB) The transmission gain of the headset. The default value is 0dB.
Headset RX Gain (dB) The receive gain of the headset. The default value is 0dB.
Headset Type
Selects whether the connected headset is normal RJ11 headset or
Plantronics EHS headset.
Headset Key Mode
When headset is connected to the phone, users could use the
HEADSET button in two different modes:

Default Mode

When the phone is in idle, press HEADSET button to offhook
the phone and make calls by using headset. Headset icon will
display on the top of the call screen in dialing/talking status;