Grandstream GXP2200 User Manual - Manual (Page 116)

Firmware Version 1.0.3.26 GXP2200 USER MANUAL Page 115 of 159
To connect and use USB camera:
1. Insert USB camera into USB port at the back of the GXP2200.
2. It will take a few seconds for the GXP2200 to prepare the connection.
3. To check the connection and compatibility of the USB camera with the GXP2200, go to GS Market
and download Camera.apk. Run Camera.apk with the USB camera plugged in to check the image
from the camera.
4. If the USB camera is compatible after step 3, users could then start using it for SIP video call.
To connect a USB light:
1. Insert USB light into USB port at the back of the GXP2200.
2. It will take a few seconds for the GXP2200 to prepare the connection.
3. If GXP2200 has an incoming call, the light will flash.
Note:
The GXP2200 doesn't support video call using 3rd party apps. Please check the FAQ information in the
following link for a list of compatible cameras on GXP2200.
http://www.grandstream.com/support/faq/gxp2200
SD CARD
1. Insert your SD card into SD Card slot at the back of GXP2200. Please make sure the SD Card
is inserted with right direction on GXP2200;
2. It will take a few seconds for the GXP2200 to prepare the connection. Then the SD Card
icon will show on the status bar;
3. To access SD Card, go to GXP2200 MENU->File Manager->sdcard. Tap on it to access and
manage your data.