Gasboy FHO Pods - Manual (Page 6)

1
HID POD
SECTION
1.1. GENERAL
This section describes the HID Pod unit. The unit, connected to the HO PC, enables users to read an
HID contactless tag and associate it to a device, used for vehicle or driver identification.
1.2. HID POD DESCRIPTION
The HID Pod unit (see Figure 1-1), connected to the HO PC, enables users to read an HID tag and
associate it to a device, used for vehicle or driver identification.
The embedded system, housed in a plastic enclosure, functions as an interface between the FHO PC
and the provided 3rd party RFI reader manufactured by HID. The HID reader includes a status
indicator (green and red). In addition, an internal buzzer beeps to provide audio feedback. The
status of the current operation is indicated as follows:
Positive recognition – Green and a single beep
Negative recognition – Red and three consecutive beeps
Power On is also indicated by a constant red light.
The rear panel includes connectors for LAN communication to the HO PC and for power supply
(see Figure 1-2). An external power supply, P/N 811307100 (see Figure 1-3) is provided with the
unit.
Figure 1-1. HID Pod, General View
4 FHO Pods User’s Manual