Gasboy FHO Pods - Manual (Page 22)

20 FHO Pods User’s Manual
2.8. MAINTENANCE
This section provides general maintenance and troubleshooting instructions for the MiFare Pod.
2.8.1. Cleaning
C C A A U U T T I I O O N N
Do not use any solvents such as thinner or benzene.
The MiFare Pod should be cleaned periodically, in order to ensure proper operation.
The cleaning purpose is to remove any dust or foreign body that may harm the reader and
consequently prevent the completion of the tag acquisition process.
Clean the Tag Reader with a damp cloth only.
2.8.2. Troubleshooting
Table 2-3 lists the recommended procedures for troubleshooting the MiFare Pod.
Table 2-3. Troubleshooting
No. Symptom Troubleshooting Procedure Recommended Action
1 Display is off Check DC Voltage power supply
output Replace DC Voltage
Power Supply
Check the proper connection between
the Power Supply and MiFare Pod Connect the PS
connector anew
2 No communication
between MiFare Pod and
the HO PC
Check RS-232 connection between
the MiFare Pod and the HO PC Replace MiFare Pod
3 LEDs are not operating Check DC Voltage power supply
output Replace DC Voltage
Power Supply