Operation, Maintenace, Changing the hid pod default ip address – Gasboy FHO Pods User Manual

Page 10: Operation 1.8. maintena

Text mode
Original mode

Figure 1-4. Setting the HID Pod in FHO Administration Setup – General Screen

1.7. OPERATION

Please refer to paragraph 2.7

1.8. MAINTENANCE

This section provides general maintenance and troubleshooting instructions for the HID Pod.

1.8.1. Changing the HID Pod Default IP Address
In order to change the HID Pod IP address, as it may be required, proceed as follows:

1. Power ON the unit
2. Connect the HID Pod to a PC (LAN Connection)
3. Set the PC's IP address to the HID default IP
4. Open the Web browser, and enter the default IP address of the HID Pod as it appears on the

label on the unit's rear panel. The Setup Main Screen is displayed (see Figure 1-5)

FHO Pods User’s Manual