Gasboy FHO Pods - Manual (Page 21)

FHO Pods User’s Manual 19
2.7. OPERATION
This section provides operation instructions for the MiFare Pod.
2.7.1. Acquiring a Tag Number
To acquire a tag number and associate it to a device in the FHO system, proceed as follows:
1. Wave the tag in front of the unit reader
2. In cases where the MiFare Pod recognizes the tag, the green LED turns on, a beep is emitted
and the tag number appears on the display
3. Click on the Acquire button on the Format tab in the FHO Device Properties dialog box (see
Figure 2-9)
4. The tag number appears in the Card Number text box
5. Click OK to apply the changes and associate the tag to the driver/vehicle
Figure 2-9. Device Properties – Format Tab