Gasboy Tag Reader - Manual (Page 24)

Figure 2-7. Scan/Set New Address Dialog Box
d. Enter the address range to be scanned using the Scan From and To spin boxes and
then click on the Scan button
e. The application displays all the allowed addresses in ascending order on the bottom
of the screen
f. Click on the required address and then click Choice
g. The selected address in displayed on the New Address spin box. Click Set to assign
the new address to the device
h. Click Close to exit the dialog box
i. Click Exit on the OrPT Host Main Screen to close the application
The OrTR is now ready for use.
Tag Reader Installation Guide 20