Gasboy Tag Reader - Manual (Page 13)

Tag Reader Installation Guide 9
In North America, use a NEC Class 2 power supply, low voltage and low current [maximum
100 VA even under fault conditions]. The adaptor can be installed in the office, in the installation
pole or pedestal, or in a separate box.
The TR is provided with DC connection cables protruding from the rear panel for easy connection.
N N O O T T E E
If the power supply is installed far from the TR box,
make sure the TR receives a correct voltage! There
may be a power failure on the lines!
1-5. 1-5.
HOUSING HOUSING
The Tag Reader system enclosure is made of rugged plastic, in the form of a small box. The
enclosure is weather-proof in order to sustain the harsh environment of a Home Base Station. The
devices in its front panel are sealed to prevent humidity and dust penetration.
1-6. 1-6.
SPECIFICATIONS SPECIFICATIONS
1-6.1. Operational
 User Interface – Alphanumeric LCD
Dual-LED green and red indicators
Piezoelectric speaker
Readers - Contactless MiFare reader
Magnetic card reader (optional)
Payment contactless cards reader (optional)
 Display Type – Backlit alphanumeric LCD with 5×7 dot matrix display units
 Display Size – 2 rows of 16 characters each
1-6.2. Communication Interface
 RS- 485
1-6.3. Physical
 Height – 140 mm (5.1 in.)
 Width – 210 mm (8.3 in.)
 Depth – 38 mm (1.5 in.)
 Weight – 480 gram (1.1 lb.)
(see Figure 1-4).
1-6.4. Power
 Operating voltage - 12 - 24 V DC.