Gasboy Tag Reader - Manual (Page 17)

Tag Reader Installation Guide 13
0
SECTION 2
IN
SECTION 2
IN STALLATION STALLATION
2-1. 2-1.
GENERAL GENERAL
This section provides installation and configuration instructions for the Tag Reader, and instructions
for solving problems that may occur during installation and operation
The Tag Reader is designed to be installed in a non hazardous location in the station or tanker truck
in both indoors and outdoors installation. The Tag Reader is intended for installation outside the
associated fuel pump, on the side accessible to the customer (at an area defined as safe area).
The Tag Reader is designed to be installed in a non hazardous location in the station.
Three installation alternatives are available:
1. Installation on a wall or pole
2. Together with the CFN PLUS station controller. See Figure 2-3 for instructions.
3. In fueling trucks, as part of the TC solution
Figure 2-1 – Tag Reader beneath CFN PLUS