Gasboy Fuel Point Reader - Manual (Page 8)

GASBOY Fuel Point System
1-4 03/28/03
FUEL POINT READER
Description
The Fuel Point Reader (FPR) is housed in a weatherproof cabinet. It is microprocessor-based
and consists of modular components and configured software. It communicates vehicle
information to the GASBOY fuel management system controller for up to eight fueling positions.
Multiple fuel point readers may be used for systems with more than eight fueling positions. When
used with the CFN II FMS, multiple FPR's may be connected for controlling up to 32 fueling
positions.
Location
The Fuel Point Reader may be factory-mounted to a new FMS, located independently on the
island, or retrofitted to an existing GASBOY FMS, as described in Section 4. It can also be wall-
mounted inside a building, but this option may increase the installation costs because each N-
Ring requires a two-wire run to the FPR. When wall-mounted, the FPR should be located near
other fuel system components such as pump control unit, circuit breakers, wiring trough, etc..