Gasboy Fuel Point Reader - Manual (Page 7)

03/28/03 1-3
Section 1
INTRODUCTION
PURPOSE
The GASBOY Fuel Point Reader Installation and Retrofit Instructions Manual is provided to assist
you in installing the Fuel Point option to your GASBOY fuel management system (FMS) It also
provides the necessary instructions for installing a Fuel Point Reader on a FMS pedestal (Section
4). This manual should be supplied to the electrician prior to the installation of conduit and wiring
to ensure your Fuel Point system is installed properly. Faulty installations are the major cause of
system malfunctions. The system must be installed as described in this manual to ensure the
reliability and proper operation of the system. Please read this entire manual before starting
installation.
GASBOY provides a toll-free number for customers and installers having any questions pertaining
to the installation: 1-800-444-5529
SYSTEM OVERVIEW
Fuel Point adapts to Listed GASBOY fuel management systems for hassle-free fueling. System
applications determine actual components required. Your system will consist of the following
components:
● a GASBOY fuel management system (FMS) (Listed models 1000, 1000P, or 2000S CFN)
● Fuel Point Reader (FPR)
● Pumps/dispensers modified using Listed Dispenser and Hose Retrofit Kits (consisting of I/S
Pre-amp and one or two kits)
● T-Ring Tank Antenna (See Manual C35699)
● Vehicles equipped with materials from Vehicle Installation Kits (See Manual C35699)
● Vehicle Module(s) (VM's)