Pump error codes – Gasboy M06875K00X User Manual
Page 22
Programming the ATC Option
© 2006 GASBOY
7300 West Friendly Avenue • Post Office Box 22087
Greensboro, North Carolina 27420
Phone (800) 444-5529 •
• Printed in the U.S.A.
MDE-4556 Gasboy ATC Kits M06875K00X Installation Manual • July 2006
Atlas™ is a trademark of Gasboy Inc.
Allen
®
is a registered trademark of Industrial Fasteners, Inc.
Phillips
®
is a registered trademark of Phillips Screw Company.
SAF-T-LOK
®
is a registered trademark of SAF-T-LOK Chemical Corporation.
Teflon
®
is a registered trademark of E.I. Du Pont de Memours and Company.
Pump Error Codes
The following list describes pump error codes that you may observe. These codes are useful
when troubleshooting a problem.
Error Code
Description
22
Not Used
23
Grade Assignment Changed
24
Conversion Factor Changed/ Not Programmed
25
Two-Wire/Stand- Mode Changed
26
No Conversion Factor Table
27
Side A* Two-Wire ID Changed
28
Side B* Two-Wire ID Changed
29
Pump Timeout Error
30
Not Used
31
Totals Data Error
32
Pulser Count Error
34
Not Used
35
Configuration Data Error
36
Unit Type Configuration Code Changed
37
PIN Code 1 Changed
38
PIN Code 2 Changed
39
Cast/Credit Option Changed
41
Side Exists Option Changed
42
PPU Options Changed
43
Not Used
44
Pump Handle Up at Power Up
* Side A is the Junction box opening side; side B is the opposite side.