Gasboy Atlas Discharge - Manual (Page 9)

MDE-4503 Atlas Discharge and Valve Conduit Retrofit Kit • July 2005 Page 9
Installing the M06228K001 or M06228K002 Kit
Figure 4: Installing Valve Wires
19 Screw the retained union half to the end of the conduit that will fit to the junction box as
shown in
Figure 4 .
20 Tighten the conduit fittings sufficiently to where final installation only requires minor
adjustment.
21 Ensuring that the o-rings are in place, reinstall the valve/filter manifold using (2) of the
retained 5/16 x 1 inch bolts into the right side meter mounting holes as shown in
Figure 5 . (Do
not tighten.)
22 Install the meter stabilizer bracket ( Figure 5 , item 2) by mounting it to the left side of the back
of the manifold mounting flange as shown in Figure 5 . Insert (2) of the retained 5/16 x 1 inch
bolts. (Do not tighten.)