Gasboy Atlas Fuel Systems Site Prep Manual - Manual (Page 29)

MDE-4333E Atlas Fuel Systems Site Preparation Manual · November 2011 Page 25
Plumbing Requirements Site Preparation
Plumbing Requirements
Highly flammable and explosive fuels are present. Failure to observe all safety precautions
could result in severe injury or death. Observe all safety precautions in this and other
manuals.
WARNING
Connecting the Pump/Dispenser Inlet Pipes
WARNING
DEF, flexible fuels such as Biodiesel, high alcohol percentage fuels, and so on, may be
incompatible with certain plumbing materials and hydraulic components.
Use recommended sealant, Loctite ® #567 (Part Number 56747) and Loctite Primer-N 7649
(Part Number 21347) for DEF pipe threads. Do not use thread tape.
Use only UL-listed TPS PTFE Pipe Sealant manufactured by SAF-T_LOC International Corp.
for E85 pipe connections.
Use of incompatible materials or components with alternative fuels such as E85 or DEF can
result in leaks or unexpected failures of components resulting in fire or explosion or
environmental damage.
When dispensing alternative fuels such as E85 or DEF, verify with the manufacturer of the
material or component that all plumbing components are compatible with the fuels or DEF
being dispensed. Do not replace the dispenser or pump parts with those incompatible with the
fuel or DEF involved.
WARNING
The Shear Valves must be installed correctly.
Improperly or insufficiently anchored Shear Valves can lead to fire or explosion that could
result in severe injury or death.
Anchor all the Shear Valves as per the manufacturer’s instructions.