Foxconn 865A05-G-6ELS - Manual (Page 62)

56
Chapter 4 Driver CD Description
865A05 G/P/PE/GV User Manual
Description: all Line Out, Line In and Microphne functions exist in 2-channel mode.
4-Channel Analog Audio Interface
Description: in the 4-channel setting, Line In is changed to Line Out function.
2-Channel Analog Audio Interface
Line Out (front channels)
Line In
M icrophone
Line Out (front channels)
Line Out (rear channels)
M icrophone
2). Use 4-/6- Channel Audio Functions
After installing the driver, you can use the 4-/6- channel functions. First, connect
4-/6- speakers corresponding to the audio interfaces and then select the 4-
/6- audio settings in the software.
Connect Audio Box
In order to use the multi-channel function, you must connect several speakers
to the system. You must connect the same number of speakers as channels
selected in the software. The audio interface on the rear panel can only support
2-channel analog audio output function. W hen you select the correct settings
in the software, the audio interface on the rear panel automatically changes
into a 4-/6- channel analog audio interface. Please refer to
“How to Select 4-/6-
Channel Setting ” at the end of this chapter for more setting information. Ensure
all speakers are connected to the Line Out interfaces. Use the interface on
the rear panel to use 2-, 4- and 6- channel configuration, described as follows.
PDF created with pdfFactory Pro trial version www.pdffactory.com