Foxconn 865A05-G-6ELS - Manual (Page 13)

7
Chapter 2 Installation Instructions
865A05 G/P/PE/GV User Manual
CPU
This motherboard use socket 478 CPUs with a FSB 400/533/800MHz and Hyper-
Threading technology.
Installation of CPU
NOTE: The CPU pins must be properly
aligned with the slots in the socket, oth-
erwise the CPU may be damaged.
1. Lift the retention arm from the
socket until it is in a position of 90 o
from the base of the socket.
2. Locate the gold triangle on the
CPU. Align the triangle to the gap
in the base of the socket and insert
the CPU into the socket. Make
sure that the CPU
’s pins are
aligned properly with the slots
in the socket. Then lower the retention
arm to secure the CPU in place.
CPU pin 1 Press down the CPU
socket level
Remark:
Please make sure to have your CPU with the overheat-proof radiat-
ing flange and cooling fan. Please contact with the distributor if your
CPU has no such overheat-proof radiating flange and cooling fan,
and make such units installed properly prior to the start-up of your
computer.
CPU socket level
up to 90 degree
Socket cut edge
PDF created with pdfFactory Pro trial version www.pdffactory.com