Chapter 2 installation instructions – Foxconn 865A05-G-6ELS User Manual
Page 26
20
Chapter 2 Installation Instructions
865A05 G/P/PE/GV User Manual
Warning:
This AGP slot does not support 3.3V AGP cards. The motherboard
may be damaged if a 3.3V AGP card is used. Verify that your AGP
card is not 3.3V and that the golden fingers are not damaged or
dirty.
Installing an expansion card
1. Before installing the expansion card, read the documentation that came with it
and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing expansion cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
PDF created with pdfFactory Pro trial version