Chapter 3 bios description – Foxconn 865A05-G-6ELS User Manual
Page 42
36
Chapter 3 BIOS Description
865A05 G/P/PE/GV User Manual
v
IDE Primary Master/Slave UDMA (Default: Auto)
This option is used to set whether the IDE Primary Master/Slave Unit supports
Ultra DMA. With it set to Auto, BIOS will automatically test whether IDE supports
Ultra DMA; with it set to Disabled, the Ultra DMA function will be locked.
v
On-Chip Secondary PCI IDE (Default: Enabled)
This option is used to set whether the On-chip Secondary PCI IDE is used. The
available setting values are: Disabled and Enabled.
v
IDE Secondary Master/Slave PIO (Default: Auto)
This option is used to set the PIO transfer mode under the IDE Secondary Mas-
ter/ Slave Controller. With it set to Auto, BIOS will automatically detect whether IDE
supports the Ultra DMA; with it set to Disabled, the Ultra DMA function will be
locked.
v
IDE Secondary Master/Slave UDMA (Default: Auto)
This option is used to set whether the second group of primary/secondary
equipment supports Ultra DMA. If the setting is Auto, BIOS will automatically
detect whether the IDE hard disk supports Ultra DMA; if the setting is Disabled,
it will be locked.
v
On-Chip Serial ATA (Default: Disabled)
This option is used to set the On-chip Serial ATA function. When it is set to Dis-
abled, the function will be locked; when it is set to Auto, the BIOS will lock the
function; with it set to Combined Mode, four HDDs at most will be supported;
with it set to Enhanced Mode, six HDDs at most will be supported (for those under
Windows 2000 and WindowsXP only); with it set to S-ATA Only, only the S-ATA
HDD can be used.
v
Serial ATA Port 0/1 Mode (Default: Primary Master/Primary Slave)
This option is used to set the Serial ATA Port 0/1 Mode.With the mode set to
Primary Master/Slave, the Primary IDE cannot be used; only the secondary IDE
and SATA ports 0/1 will be available. With the mode set to Secondary Master/
Slave, the secondary IDE will be unavailable; only the primary IDE and SATA
ports 0/1 can be used. With the mode set to Primary/Secondary Master, and the
option SATA Only selected, the SATA HDD acts as both the primary and second
ary drive. With the mode set to SATA 0/1 Master and the option SATA Enhanced
Mode selected, both IDE ports and both SATA ports will be available.
PDF created with pdfFactory Pro trial version