Foxconn 865A05-G-6ELS - Manual (Page 41)

35
Chapter 3 BIOS Description
865A05 G/P/PE/GV User Manual
Integrated Peripherals
Integrated Peripherals Menu
Use the arrow keys to select your options; press the key to enter the
setup menu. The options and setting methods are discussed below:
v IDE HDD Block Mode (Default: Enabled)
This option is used to set whether the IDE HDD Block Mode is allowed. The
available setting values are: Disabled and Enabled.
v IDE DMA transfer access (Default: Enabled)
This option is used to set up the IDE transfer access —with it set to Enabled, the
IDE Transfer Access uses the DMA mode; with it set to Disabled, the IDE Transfer
Access uses the PIO mode.
v On-Chip Primary PCI IDE (Default: Enabled)
This option is used to set whether the On-chip Primary PCI IDE interface is
used. The available setting values are: Disabled and Enabled.
v IDE Primary Master/Slave PIO (Default: Auto)
This option is used to set the PIO transfer mode under the IDE Primary Master/
Slave Controller. PIO transfer mode options include Auto/0/1/2/3. Set the transfer
mode according to the IDE specification. It is recommended to set it to Auto for
the auto-test by BIOS.
Onchip IDE Menu
PDF created with pdfFactory Pro trial version www.pdffactory.com