Chapter 3 bios description – Foxconn 865A05-G-6ELS User Manual
Page 48
42
Chapter 3 BIOS Description
865A05 G/P/PE/GV User Manual
v
Power On by Ring (default: Enabled)
This option is used to set the system to wake up by Modem. After turning this
function on, remote software can be used to turn on the computer. This function
needs to be supported by the relevant hardware and software. The setting
values are Disabled and Enabled.
v
Resume by Alarm (default: Disabled)
This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled.At the same time it
must turn on power of host. The setting values are Disabled and Enabled.
v
Date (of Month) Alarm
This option is used to set the timing for the start-up date. The setting values
contain 0-31.
v
Time (hh:mm:ss) Alarm
This option is used to set the timing for the start-up time. The setting values
contain hh: 0
– 23; mm:0 – 59; ss:0 – 59.
v
Primary IDE 0/1, Secondary IDE 0/1 (default: Disabled)
This option is used to set whether cancels the sleep status of current PC and
this IDE when primary/secondary IDE 0/1 equipment has accessing action re-
quirements. The setting values are Disabled and Enabled.
v
FDD, COM, LPT Port (default: Disabled)
This option is used to set whether cancels the sleep status of current PC and
this IDE when floppy driver, serial equipment and parallel equipment have
accessing action requirements. The setting values are Disabled and Enabled.
v
PCI PIRQ [A-D] # (default: Disabled)
This option is used to set the system to wake up by PCI equipment. The setting
values are Disabled and Enabled.
PDF created with pdfFactory Pro trial version