Chapter 2 installation instructions, Power supply, Atx 12v power connector: cn25 – Foxconn 865A05-G-6ELS User Manual
Page 16: Atx power connector: cn11, Attention, Atx 20-pin power terminal, Atx 12v power terminal
10
Chapter 2 Installation Instructions
865A05 G/P/PE/GV User Manual
Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting the
power supply.
ATX 12V Power Connector: CN25
CN25 is the ATX power supply connector. Make sure that the power supply cable
and pins are properly aligned with the connector on the motherboard. Firmly plug
the power supply cable into the connector and make sure it is secure.
ATX Power Connector: CN11
The ATX power supply connects to CN11 and provides power to the CPU.
Attention:
You have to press the power button for more than four seconds if you
change the default
“Instant-off” setting to “Delay 4 Sec” for the soft-
off by Power Button option in the BIOS Power Management Setup.
ATX 20-pin Power Terminal
20
10
12V
5VSB
5V
GND
3.3V
GND
5V
GND
Pw-OK
3.3V
11
1
5V
GND
3.3V
GND
GND
5 V
-5V
GND
PS-ON
-12V
ATX 12V Power Terminal
1 2 V
G N D
1 2 V
4
3
2
1
G N D
PDF created with pdfFactory Pro trial version