Foxconn 865A05-G-6ELS - Manual (Page 14)

8
Chapter 2 Installation Instructions
865A05 G/P/PE/GV User Manual
1. Locate the CPU slot and base for fan
on the motherboard.
3. Attach the fan to the base.
Installation of CPU Fan
New technology allows processors to run at higher and higher frequencies. To
avoid problems arising from high-speed operation, for example, over-heating,
you need to install the proper cooler and fan. Install the cooler/fan according to
the following procedures:
2. Apply a little silica gel to the back of
the CPU.
4. Connect the power fan ’s power cable
to the appropriate 3-pin terminal on
the motherboard.
Warning:
Excessive temperatures will severely damage the CPU and system.
Therefore, make sure that the cooling fan works normally at all times
in order to prevent overheating and damage to the CPU.
PDF created with pdfFactory Pro trial version www.pdffactory.com