Foxconn 865A05-G-6ELS - Manual (Page 49)

43
Chapter 3 BIOS Description
865A05 G/P/PE/GV User Manual
PnP/PCI Configurations
v Reset Configuration Data (default: Disabled)
This option is used to set whether permits the system to automatically distribute
IRQ DMA and I/O address when the machine is turned on every time. The set-
ting values have Disabled and Enabled.
v Resources Controlled By (default: Auto (ESCD))
This option is used to system set resource control style. If all cards you use
support PnP, it can select this option, BIOS automatically distributes interrup
tion resources. If you install ISA card not supporting PnP, in the case that the
system occurs hardware conflict, it needs to select
“Manual” and manually
adjust interruption resources. For this motherboard has no ISA slot, so it does
not consider this option.
v IRQ Resources
Press the key “Enter”, then the user can manually set IRQ resources.
v PCI/VGA Palette Snoop (default: Disabled)
If you use non-standard VGA card, if graphic acceleration card or MPEG audio
card is not accurate in display of color, it can solve this problem when this item
is set. The setting values have Disabled and Enabled.
v INT Pin 1-8 Assignment (default: Auto)
This option is used to distribute the interruption requirements of various PCI
equipment.
PnP/PCI Configurations Setup Menu
PDF created with pdfFactory Pro trial version www.pdffactory.com