Foxconn 865A05-G-6ELS - Manual (Page 19)

13
Chapter 2 Installation Instructions
865A05 G/P/PE/GV User Manual
Connectors
This motherboard includes interfaces for FDD, IDE HDD, SATA, and computer
case, USB, 1394, IR module, CPU/system fan, and others.
FDD
This motherboard includes a standard FDD interface, supporting 360K, 720K, 1.
2M, 1.44M, and 2.88M FDDs.
FDD Interface
HDD Interface: IDE1 & IDE2
This motherboard includes an Ultra DMA 33/66/100 controller, allowing the IDE
interface device to work in PIO mode 0-4, Bus Master, and Ultra DMA 33/66/100
modes. You can use four IDE devices, such as the HDD, CD-ROM, etc. These
adapters support the provided IDE HDD line.
PIDE (Primary IDE Interface)
The first HDD must be connected to the PIDE interface. A master HDD and a slave
HDD can be connected to PIDE. The second HDD must be set as the slave via
the corresponding jumper for HDD.
SIDE (Secondary IDE Interface)
You can connect a master and a slave HDD to SIDE.
Attention:
If you want to connect two HDDs to one HDD line, then the second
HDD must be set as the slave. As to the setting of master/slave
HDD, please refer to the instructions provided for such HDD.
PDF created with pdfFactory Pro trial version www.pdffactory.com