Formax 6606 Series - Manual (Page 75)

8. Rotate thumbwheel E to adjust the envelope height setting. The envelope should fit
exactly in the space indicated by the arrows.
9. Rotate thumbwheel F to adjust the side guides so, that the envelopes:- Fit exactly
between the side guides- Can move freely
10. Fill the envelope hopper with envelopes, positioned upside down. The flaps should
face the inserter.
11. Tip over the envelopes.
12. Load the envelope feeder of the inserter with about 50 envelopes.
13. Press the [Start] button.
The envelopes on the envelope hopper will be transported towards the feeder of the
inserter. Envelopes will be transported and dropped in the inserter feeder until the
envelopes reach a certain level. At that moment a sensor will detect the envelopes
and the high capacity envelope hopper will stop transporting.
When the sensor does not detect envelopes anymore the hopper will start again and
the process will be repeated.
5
English
71
| Page 71 | feb-24-2014 01:32 | Options