Formax 6606 Series - Manual (Page 32)

3. Change the [Count] for more than one document from a feeder.
4. Confirm the enclosure settings with [OK].
Continue with the fold settings (see Fold settings on page 28).
Fold Settings
Default the machine suggests the most logical fold type. This fold type is highlighted in
purple. However, you can select other fold types and change their settings.
Tap a fold type. 1.
2. If necessary, tap [Settings] to change the fold settings.
3. Tap [>].
If you want to revert to the machine recommended fold type, switch [Use recommended
fold] to On.
Continue with the exit settings (see Exit settings on page 29).
28
| Page 28 | feb-24-2014 01:32 | Working with Jobs
3
English