Formax 6606 Series - Manual (Page 111)

BCR basic license
For the BCR basic license the following functions are available:
• Page N of M: as long as N is below M, the document set is not complete. As soon
as N=M, the set is complete and will be inserted into an envelope.
• Insert/Accumulate: defines when a document set is complete and must be inserted
into an envelope.
• Customer ID: BCR uses the Customer ID code to complete a set. If the ID changes,
the set is inserted. This is only possible with reverse reading.
At least one basic commands is required. Page N of M can be used in combination with
Customer ID as an integrity check.
BCR advanced license
For the BCR advanced license the following functions are available:
• The basic functions (page N of M, insert/accumulate, Customer ID)
• Sheet sequence - Every sheet has a number, regardless of the document set it is
part of. If a sheet is missing, an error is generated.
• Group sequence - Every document in a set has the same group number. If one
document set is missing, an error is generated.
• Divert (Divert & Continue) - The set will be diverted and the system continues.
• Stop (Divert & Stop) - The set will be diverted and the system stops indicating
error (FT1-RE1-000 Reading stop - Stop mark read).
• Selective feed - If the system reads the command, an enclosure from the enclosure
feeder
is added to the set. This function is printed on the last sheet of a set. It is also
possible
to add an enclosure from the Thin Booklet Feeder.
• Sealing control - Determines if envelopes are sealed or not.
• Present on Deck & Continue - The set leaves the system from the upper unit. The
system does not stop processing. The envelopes are not sealed.
• Present on Deck & Stop - The set leaves the system from the upper unit. The system
stops. The envelopes are not sealed.
• Exit selection - Determines if the envelope is transported to stacker or to the side
exit.
8
English
107
| Page 107 | feb-24-2014 01:32 | Reading