Formax 6606 Series - Manual (Page 62)

Load Documents
Fill the document feeder tray as follows:
Note the Document Orientation when filling the document feeder
trays.
1. Open the left-hand side guide A by turning it downwards.
The feed rollers will automatically be lifted.
2. Place a stack of documents between the side guides.
3. Turn the left side guide upwards again.
Document Separation
The term ‘Document separation’ refers to the adjustment required for separating the upper
document
from the rest of the documents in the stack. This prevents pulling too many
documents from the stack at the same time.
The document separation for the automatic feeders is set automatically; there are no manual
adjustments needed.
Feeders 1 and 2 (the feeders in the two lowest positions) can be special feeders. The
document separation for special feeders must be adjusted manually. While special feeder
trays fit in all positions, adjusting the separation is only possible when they are fitted on
position 1 and 2.
To adjust the separation of special feeders follow the instructions as described in Processing
mail sets with glossy material .
58
| Page 58 | feb-24-2014 01:32 | Loading the System
4
English