Formax 6606 Series - Manual (Page 18)

The following is a list of symbols or icons and their descriptions.
Document with reading
Shows the correct document
orientation; A is the address. Main document.
Shows the correct document
orientation; A is the address.
Enclosure Daily mailFeature to manu-
ally insert mail-sets one by
one into the system.
NotificationNext to this sym-
bol, a message appears, e.g.
Sealing liquid low, empty
feeder.
Envelope sealing offEnvel-
opes will not be sealed. The Envelope, sealing onEnvel-
opes will be sealed. The
symbol shows the correct
envelope orientation.
When sealing is off, the flap
of the envelope is closed but
not moistened. symbol shows the correct
envelope orientation.
Change feeder traysPossib-
ility to change from one feed-
er tray to another. Feeder linkingLinking means
that when one feeder is
empty, the system automatic-
ally starts feeding documents
from the other feeder. This
symbol at the feeders shows
if the feeders are linked.
Fold type
This icon shows what kind of
fold type has been set. D
FC/mail set thickness de-
tectionDouble
feed control
and/or
mail set thickness de-
tection
has been set to 'off'.
By
default the dfc/mail set
thickness
detection will be set
to
'on' and the icon will not be
shown.
Counter settingShows on
what number the counter has
been set. Exit settingThis icon shows
what kind of exit setting has
been set.
Start button
Tapping this button runs the
job. 1x buttonAfter tapping this
button the system will create
an example mail set.
14
| Page 14 | feb-24-2014 01:32 | Meet your Document System
2
English