Formax 6606 Series - Manual (Page 65)

Load
Documents (Production Feeder)
To load documents:
When
loading the Production Feeder, make sure that the
document/BREs
are positioned parallel in relation to the feeding
plate
assembly to ensure correct feeding.
The feeding plate assembly will be shifted up automatically (when the system starts
processing) until documents/BREs are underneath the rubber paper pullers.
In case of long documents, use the feeding plate extension B to
support the documents.
1. Squeeze the two blue handles A and B.
2. Shift the feeding plate assembly C to the rear position.
3. Loosen the stack of documents and place them in the feeder tray.
BREs with flap down and leading (top side pointing to system).
4
English
61
| Page 61 | feb-24-2014 01:32 | Loading the System