Exit settings, English – Formax 6606 Series User Manual
Page 33
Exit Settings
Select the Exit Settings:
The system has two exits: the stacker and the side exit. In the Exit settings of the job,
you define which exit is used. When Reading is on,
more options for exit selection are
on page 122. Standard (without reading), you choose between:
- Fixed exit: tap [Settings] to select which exit must be used for this job. If you
select stacker, you can choose to let the system continue on the side exit if the
stacker is full.
- Batching: tap [Settings] to define after what number of mail sets, the system
must switch to the other exit.
- Thickness: tap [Settings] to define the exit for document-sets that are too thin
or too thick. At the inserter, the thickness is measured and compared to a
reference thickness. Depending on the selection in this menu the envelopes
exit to the stacker or the side exit. The first document-set determines the
reference thickness.
1.
2.
Optionally tap the [Advanced] button to set the
on page
30 settings.
3.
Tap [>].
Continue with
Finish the job definition and start the job
on page 34, or set the
on page 31.
3
English
29
| Page 29 | feb-24-2014 01:32 | Working with Jobs