Formax 6606 Series - Manual (Page 49)

Create a Job with Custom Envelopes
Makes sure that your custom envelopes fit within the specifications
(see
Envelope Specifications on page 144).
1. Create a Manual job on page 23 and select envelope.
2. Tap [Custom].
3. Enter the envelope height.
4. Tap the [Flap] tab if you use open flap envelopes.
5. Select if you want to feed envelopes with flaps up (On) or with flap down (Off).
6. Tap [OK] to save and close the envelope settings.
7. Complete the Fold Settings and Exit Settings to complete the job and tap [Save] to
save the job.
Follow the instructions as described in 'Create test mail set' on page 35.
3
English
45
| Page 45 | feb-24-2014 01:32 | Working with Jobs