Formax 6606 Series - Manual (Page 143)

Filling the Sealing Li-
quid Reservoir
on
page 68
Check water level,
refill if needed. Water level low. Flap not sufficiently
moistened.
Clean and replace
brushes Check brushes, re-
place if needed by the
extra soaked set. Brushes dry.
Clean and replace
brushes Check brushes, clean
if needed. Brushes dirty.
Filling the Sealing Li-
quid Reservoir
on
page 68 #
Check the moistening
felt, refill water tray if
needed. Moistening felt dry.
Replace or clean
moistening cloth Check the moistening
felt, clean if needed. Moistening felt dirty.
Clean and replace
brushes Replace brushes. Brushes worn out.
Replace or clean
moistening cloth Replace moistening
felt. Moistening felt worn
out.
Editing a job Check fold settings,
adjust if needed. Inserted document
too big. Envelope not always
ejected from sealer.
Verifying the Insert
Position
on page 39
Check adjustment of
envelope stop posi-
tion and fingers. Document not inser-
ted deep enough.
Maintenance Sched-
ule
on page 123
Clean sealing area. Sealing area dirty.
10
English
139
| Page 139 | feb-24-2014 01:32 | Fault Finding