Formax 6606 Series - Manual (Page 38)

Finish the Job Definition and Start the Job
When you have finished the exit settings, the touch screen shows an overview of the job
settings.
In this screen you can change the following settings:
• Move documents between feeders (see Change to an other feeder tray on page 47)
• Link feeders (see Link feeder trays on page 47)
• Change the counter settings (see Change the counter settings on page 31)
When you are ready with these settings, proceed as follows:
Load the documents on page 55 as indicated on the Job info screen. 1.
2. Tap [1x] to create a test mail set (see Test mail set on page 35).
3. If desired, you can save the job (see Save a job on page 49).
4. Tap [Start] to start the job.
34
| Page 34 | feb-24-2014 01:32 | Working with Jobs
3
English