Formax 6900 Series - Manual (Page 9)

8/40
Fig. 12
5.4.1 5.4.1 5.4.1 5.4.1 Job info screen overview Job info screen overview Job info screen overview Job info screen overview
When key 1 is pressed in the “main menu”, the job info
screen will be displayed (see Fig. 12). The job info screen
shows the following functions:
• select a higher job number (key 1).
• select a lower job number (key 2).
• go to the job data of the upstream (transport) module (key
3).
• go to the job data of the downstream (sorting) module
(key 4) (the job data of the downstream (sorting) module
is shown in Fig. 15).
Press the escape key to go back to the main menu.
Because of the modularity of the system, different
configurations are possible. So take in account that the job
data can differ from which is shown in this job info screen
overview.
Fig. 13
When key 3 is pressed in the “job data” menu the upstream
(transport) module screen is displayed (see Fig. 13). The
screen shows the following functions:
• select a higher job number (key 1).
• select a lower job number (key 2).
• go back to the inserting module (key 4).
• go to next job data screen of the upstream (transport)
module (key 6).
Press the escape key to go back to the main menu.
Fig. 14
When key 6 is pressed in the upstream (transport) module
screen, the screen in Fig. 14 is displayed. The screen shows
the following functions:
• select a higher job number (key 1).
• select a lower job number (key 2).
• go back to the inserting module (key 4).
• go to previous job data screen of the upstream (transport)
module (key 6).
Press the escape key to go back to the main menu.
Key
1
2
3
4
5
6
Key
1
2
3
4
5
6
Key
1
2
3
4
5
6