Formax 6900 Series - Manual (Page 24)

23/40 23/40 23/40 23/40
6.3 6.3 6.3 6.3 Changing settings of a module Changing settings of a module Changing settings of a module Changing settings of a module
The settings of feed modules including the AS-1A are stored
in jobs. To provide extra flexibility, it is possible to change
the settings on a module locally (after selecting the job). In
this way it is possible to run different applications using just
one job.
These changes will not be memorized and are lost after
selecting another job or switching off the system.
Below the possible changes in settings are listed:
• all feed modules including AS-1A can be switched on or
off.
• at the FE-7, FE-9 and ST-1 the double document detector
can be switched on or off. Also the value of the multifeed
counter can be changed.
• at FE-8 changes in the "set" menu can be made.
• at the AS-1A all settings mentioned in chapter 4 can be
changed.
6.4 6.4 6.4 6.4 Additional functions Additional functions Additional functions Additional functions
The 6900 Series provides additional operating functions.
They are listed below:
AS-1A AS-1A AS-1A AS-1A
• The AS-1A can be locally switched on or off (toggle
function). To switch on or off, press and hold the “Pause”
key for one second. The AS-1A display shows an “u”
when switched off. This “u” is also visible when the AS-1A
is switched off by the IN-3.
• Extra functionality Automix TM ", see chapter 10.
SF/FS interface box SF/FS interface box SF/FS interface box SF/FS interface box
• The SF/FS interface box (used with crossfold applications
or foot switch) can be locally switched on or off. To switch
the interface box on or off, press and hold the blue reset
key (toggle function) for one second. When switched on,
a yellow (on the interface box) lamp will light.