Formax 6900 Series User Manual

Page 19

18/40

Fig. 26

5.7.3

Side guides hopper B

Take a stack of about 20 envelopes. Fan the envelopes a bit

and place the envelopes in the system with the flap to the

bottom side and trailing.
Adjust the envelope hopper side guides A (Fig. 26) by

turning the thumbwheel C, to provide just enough space for

the envelopes to move freely. Too much play causes

skewing.

5.7.4

5.7.4 Envelope separation hopper B

Envelope separation hopper B

Adjust the envelope separation by turning knob B (Fig. 26)

counter clockwise until two envelopes, one on top of the

other, can be moved backwards and forwards between the

rollers without resistance. Then turn knob B clockwise until

one envelope will pass between the rollers.
After starting the system it may occur that more than one

envelope at a time is pulled in. If this happens, rotate knob B

clockwise a quarter turn. Repeat if necessary to obtain

correct operation.
Once the envelope separation has been set, a wide variety

of envelopes can be handled.