Formax 6900 Series User Manual

Page 36

35/40

Automatic selective feeding
With this option active, the other feed units (stations 1 and

2) on the transport unit will feed an enclosure depending on

the number of pages collated by the AS-1A. If the number

of pages in a set, collated by the AS-1A is less than the

number shown by the overflow display, station 1 and

possibly station 2 are allowed to feed a document. The total

number of pages, including enclosures, will not exceed the

number shown by the overflow display.

Fig. 42

Flexible reading
The AS-1A is capable of reading OMR codes other than

the standard built in

Formax

code. Besides that, more than

one reading code can be programmed. If this is the case, a

submenu can be entered to select the appropriate code. To

do so, press both key A and the key B at the same time, see

Fig. 41 and Fig. 42 . The display C (Fig. 43) will indicate a

number. Using the + and - key below display C the number

corresponding to the appropriate code can be selected.

Then again press both key A and the key B at the same time,

to leave the submenu.
Matching of two personalized documents
See section10.2, Feed unit FE-8.

Fig. 43

10.3

10.3 6900 Series Options

Automix

The Automix

feature enables automatic processing, in

1 run, of a batch of documents which requires inserting into

different sizes of envelopes. For a specific document set an

envelope from either hopper A or hopper B from the IN-3 is

selected. Together with envelope hopper selection, if

required, via the TR-7A "twin cycle" option, documents from

station 2 (3 and 4) are automatically folded/not folded

depending on the type of envelope.
Automix

can be based on:

• OMR mark (hopper selection mark).

• Type of enclosure to be added (selective feed mark).

• Number of pages in a set (AS-1A only, IN-3 dongle level

3 only).

• Combination of selection criteria.