Formax 6900 Series - Manual (Page 31)

30/40 30/40 30/40
8.2 8.2 8.2 8.2 Additions to the error lists of other modules Additions to the error lists of other modules Additions to the error lists of other modules Additions to the error lists of other modules
Unknown set. Remove set. Page 26. During the system startup a set has been detected.
Remove this set.
62
Configuration does not match. Switch the inserter off and restore the
configuration.
A module of the system has been removed.The con-
figuration is not corresponding with the selected job.
67
System can not be set. Select job again. The job settings can not be transmitted correctly.
Check if of all covers are closed.
68
error description error description error description error description suggested solution suggested solution suggested solution suggested solution see also.... see also.... see also.... see also.... information information information information Error code Error code Error code Error code
error description error description error description error description suggested solution suggested solution suggested solution suggested solution see also.... see also.... see also.... see also.... information information information information Error code Error code Error code Error code
Document stoppage. Remove documents. The document (that has been delivered by the Side
Feed unit) does not move during a TR-7A finger
cycle. Clear the paper jam.
80
Document stoppage. Remove documents. The document to be delivered by the Side Feed unit
does not reach the TR-7A track. Remove paper jam
and adjust arm height of the Side Feed unit.
81
Feeding failure. Remove documents. The Side Feed Unit (PF) is empty. Refill the document
hopper.
120
System blocked. Remove envelope and check contents,
reset thickness detection.
The fold unit (FO-2A, FO-3) is either not present or
not correctly placed (this is indicated by a
microswitch that blocks FO operation). Place or cor-
rectly place the fold unit.
1
Document stoppage. Remove envelope and check contents,
reset thickness detection.
The document does not reach the output of the
folder. This is likely caused by a paper jam in the
FO.
2