Formax 6900 Series - Manual (Page 30)

29/40 29/40 29/40 29/40
8. 8. 8. 8. ERROR CODES ERROR CODES ERROR CODES ERROR CODES
8.1 8.1 8.1 8.1 General General General General
The central display of the inserter will display all system-wide errors that occur. When an error occurs, read the information on the screen, press the info key for more information. Follow the
instructions. Generally an error number will be given. This number can be used for reference.
error description error description error description error description suggested solution suggested solution suggested solution suggested solution see also.... see also.... see also.... see also.... information information information information Error code Error code Error code Error code
Envelope stoppage. Remove envelope,
readjust the envelope separation.
Page 7.
Page 17.
Envelope longer than reference length.
1
Envelope stoppage. Remove envelope,
readjust the envelope separation.
Page 6.
Page 17.
Envelope doesn’t reach the “track” sensor.
3
Envelope stoppage. Remove envelope. Page 26. Envelope doesn’t reach the “track” sensor. 4
Envelope stoppage. Remove envelope. Page 26. Envelope doesn’t reach the “flap” sensor. 5
Envelope stoppage. Remove envelope. Page 26. Envelope not opened or already opened in the
envelope hopper.
6
Wrong envelope size or too many enve-
lopes fed
Remove envelope,
place the correct envelopes in the hop-
per.
Page 17.
Page 26.
Wrong envelope size or separation not correctly
adjusted. 7
Closed envelope ? Put an open envelope in the hopper. probably closed envelope in hopper. 8
Document stoppage. Remove document. Page 26. Document doesn’t reach the “input” sensor. 9
Document stoppage. Remove document. Page 26. Document doesn’t clear the “input” sensor. 10
Document stoppage. Remove document. Page 26. Insert failure: Document is not clearing the “loc” sen-
sor.
11
Not enough documents inserted Remove envelope and check contents,
reset thickness detection.
Page 15
Page 26.
Document too thin.
12
To many documents inserted Remove envelope and check contents,
reset thickness detection.
Page 15
Page 26.
Document too thick.
13
Envelope stoppage. Remove envelope. Page 26. Document doesn’t clear the “eject” sensor. 14
Envelope stoppage. Remove envelope. Page 26. Document doesn’t reach the “exit” sensor. 15
Envelope stoppage. Remove envelope. Page 26. Document doesn’t clear the “exit” sensor. 16