Formax 6900 Series - Manual (Page 37)

36/40 36/40 36/40
The throats of both envelopes should have an equal shape.
Minimum requirements for Automix
TM
- IN-3 equipped with EF-3.
- IN-3 equipped with dongle level 2 or 3.
- TR-7A equipped with "twin cycle" option.
- FE-8 or AS-1A.
OMR mark (hopper selection mark)
OMR mark (hopper selection mark) OMR mark (hopper selection mark) OMR mark (hopper selection mark)
The reading code of both the AS-1A and the FE-8 can
contain a mark to control from which hopper the inserter
should feed the envelope that belongs to the document.
Type of enclosure (selective feed mark) Type of enclosure (selective feed mark) Type of enclosure (selective feed mark) Type of enclosure (selective feed mark)
The reading code of both the AS-1A and the FE-8 can
contain marks to control the other feed units on the transport
track. This allows to select for each set the enclosures to be
added. A job can be programmed such that one of the
envelope feed hoppers is linked to one of the feed stations.
If the feed station is selected to feed by the OMR code, then
automatically an envelope will be picked up from the
hopper that has been linked to that feed station.
Number of pages in a set (AS-1A only) Number of pages in a set (AS-1A only) Number of pages in a set (AS-1A only) Number of pages in a set (AS-1A only)
Document sets that contain a number of sheets up to the
actual overflow counter setting, will be folded and inserted
in the "small" envelope. If a set exceeds the actual overflow
counter setting, it will not be folded and it will be inserted in
the "big" (C4 size) envelope. Via service an internal set limit
counter can be set to a maximum of documents that are
allowed to be inserted, as desired by the customer. If a set
exeeds this number, the AS-1A will consider the set as an
overflow and will indicate error 60.