Formax 6900 Series - Manual (Page 27)

26/40 26/40 26/40
Fig. 31
7.1.4 7.1.4 7.1.4 7.1.4 The call screen The call screen The call screen The call screen
When a technical error occurs the error screen will not
display the machine symbol. Instead a message “Technical
error, call service” will be displayed (see Fig. 31).
This screen indicates that the occured error can not be
solved by operating personnel. Assistance of service
support is needed.
First write down the error code, than switch the inserter off
and on again, to verify system operation. When the error
still occurs contact your service organization.
7.2
7.2 7.2 7.2 Clearing stoppages Clearing stoppages Clearing stoppages Clearing stoppages
When an error in the paperflow occurs, the machine can
give the following suggested solutions:
• remove the document(s).
• remove the envelope.
Fig. 32
7.2.1 7.2.1 7.2.1 7.2.1 Removing documents Removing documents Removing documents Removing documents
When an error occurs in the document feed the error screen
can show the following symbols:
stoppage in the document end feed.
stoppage in the document feed.
Fig. 33
7.2.2 7.2.2 7.2.2 7.2.2 Stoppage in the document end feed Stoppage in the document end feed Stoppage in the document end feed Stoppage in the document end feed
Remove documents in the following way:
• remove documents from the document feed end.
• press the reset key.
7.2.3
7.2.3 7.2.3 7.2.3 Stoppage at the document feed Stoppage at the document feed Stoppage at the document feed Stoppage at the document feed
Remove documents in the following way:
• lift the loc by pulling the release handle A of the loc (see
Fig. 32).
• remove the document.
• close the loc.
• press the reset key.
Key
1
2
3
4
5
6